• Home
  • Composite Envisions Infusion Slow Hardener

Composite Envisions Infusion Slow Hardener

(0)No Reviews yet
$41.34 to $7,332.55
SKU: Z-21007

Description

Description

Cure Cycle: 24 hours @ Room Temperature + 8 hours @ 180°F. Test specimens for above were neat epoxy (without fiber reinforcement).

The storage temperature of Slow Infusion Epoxy will greatly affect the ease of mixing, application and curing time. For best results, Slow Infusion Epoxy should be stored at (60-80 °F or 16-27 °C) for at least 24 hours before use. Mix RESIN WITH (hardener) for 3 minutes using a Jiffy Mixer and a slow speed drill. Mix at slow speed (less than 500 rpm) to avoid air entrapment. When adding part B to part A, be sure to scrape the sides of the hardener (part B) container in order to remove all of the hardener. This is essential to maintain proper mix ratio. DO NOT mix more material than can be used within the stated working time. REMEMBER – you will have less working time at higher temperatures

Ratings & Reviews

No reviews available

Be the first to Write a Review