D7000 High Performance Release and Parting Film 48"/121.92cm (Remnant)

D7000 is a new generation of film combining the chemical inertness and universal non-stick properties of PTFE polymers with maximum conformability and heat resistance. D7000 exhibits superior release qualities over the entire temperature range. It has been successfully used in intermittent service temperature above 600°F. The high elongation allows for superior conformability for irregular shapes. Consider D7000 for the most advanced thermosetting and thermoplastic resin systems in the curing temperature range of epoxy, phenolic, BMI and comparable resins (350°F-400°F) as well as higher temperatures (600°F) where D7000, in fact, proves to be the only conformable yet thermally stable film available. Compare the data shown for D7000 versus other materials typically used in composite fabrication in order to understand the superior performance particularly for complex shapes and high temperature resins. The Tensile Strength is 4500 PSI. Thickness is .001"

PROPERTIES

Film Product	Elongation (%)	Max. Temp (F)
D7000	450	600
Teflon FEP	300	500
Teflon PFA	430	550
Tedlar PVF	190	350
Halar ECTFE	200	350

First Quality Remnants: First Quality Fabric Remnant Rolls are short rolls of fabric, which have no defects in them. These remnant rolls are either left over fabric from the end of a roll, or sections of fabric which were cut at the wrong length for a specific order. So instead of discarding the short roll, we package it up and sell it as a First Quality Remnant Roll. These First Quality Remnant Rolls are sold at 20% off of the retail price of that fabric. Second Quality Remnants: Second Quality Fabric Remnant Rolls are short rolls of fabric, which have a defect in the woven fabric in them. These remnant rolls are cut out of the standard fabrics we sell, but from sections of the rolls that have some defects in them. These defects make them not good to use if you want to make cosmetic parts, which have perfect woven fabric in them, but can be used as the inner layers of your parts, or if you are making small parts and can cut around the defects. These Second Quality Remnant Rolls are sold at 25% off of the retail price of that fabric. All remnant rolls are rounded DOWN to the nearest ½ yard. So a remnant listed as 0.5 yards may actually be between 18” and 35” in length and a remnant listed at 2.0 yards may actually be between 72” and 89” in length.