Composite Envisions Green Resin Flow Medium
Description
Composite Envisions Green Resin Flow Medium – Vacuum Infusion Mesh
This green resin flow medium (distribution mesh) is designed for vacuum infusion. Placed on top of peel ply, it creates rapid, uniform resin pathways across the laminate to speed wet-out and improve consistency on large parts and molds. It handles easily, cuts cleanly, and drapes well over gentle contours. Performance is comparable to commonly used green flow meshes (e.g., “Greenflow 75” style).
Key Features
- Fast, even distribution: Open-mesh structure promotes quick, uniform resin flow.
- Process: Use for vacuum infusion over peel ply (or perforated release, per your process).
- Handling: Conformable, easy to trim around ports and edges.
- Compatibility: Works with epoxy, vinyl ester, and polyester systems.
Placement & Use
- Lay over peel ply and under the bag; route pathways to inlets and vacuum outlets.
- Avoid compressing the mesh at sealant tape lines to preserve flow.
- Not a substitute for peel ply—use together for clean demold and surface prep options.
Ordering
- Available widths: 47" (119.4cm)
Sold by: Linear Yard— 1 yard = 36" x full width — Multiple yards ship as one continuous piece whenever possible