3M 9775WL High Tack Double Sided Acrylic Adhesive Transfer Tape 12" Wide Full Roll

Description

3M™ Adhesive Transfer Tape 9775WL+ is designed for bonding plastics, foams, wood, and textiles. The 3M™ Adhesive 300MP+ high-tack acrylic flows into crevices and voids without heat, delivering strong initial grab and full adhesion within 48–72 hours.

Ideal for Use on Fabricated Foams, Plastics, and Fabrics

9775WL+ features 5 mils (0.13 mm) of durable adhesive mounted on a 7 mils (0.19 mm), 96 lb white polycoated kraft (PCK) paper liner. It’s formulated to bond to foams, fabrics, wood, and most plastic substrates with excellent resistance to humidity, water, solvents, and chemicals.

Recommended Applications

• Foam gaskets and general foam bonding
• Bonding of textured and rough surfaces
• Fabric and textile bonding, including floorcovering lamination

Easily Flows into Crevices and Voids—No Heat Needed

The 300MP+ adhesive builds a consistently strong bond across a wide range of substrates—up to 250°F (121°C) service temperatures—without the need for heat. The heavy PCK liner supports die cutting and converting operations.

Understanding Adhesive Transfer Tapes

Adhesive transfer tapes are pressure-sensitive adhesives coated on a release liner, without a scrim or carrier. For application, position the tape with the adhesive side down, apply pressure, then remove the liner to expose the adhesive and complete the bond to the mating surface. This format is ideal for flat, irregular, or textured substrates.

Key Specifications

Why It Works

300MP+’s flow and high tack allow it to wet out rough and textured materials quickly, producing strong bonds without added heat. The robust PCK liner improves handling and enables clean, accurate die cutting for converters.