Carbon Fiber 2x2 Twill Matte Finish Vinyl Sticker 60"/152.4cm Air Release

Carbon Fiber 2x2 Twill Matte Finish Vinyl Sticker • Air-Release • 60″/152.4 cm

When you need the look of carbon fiber without a full composite layup, this premium 2x2 twill matte vinyl wrap is a clean, fast solution. The realistic weave graphic delivers a low-glare, satin appearance to better match matte clear-coated parts while the air-release adhesive helps you install dry with fewer bubbles and a smooth finish. At ~5-mil (0.005″) thickness it conforms well with the help of a heat gun and is ideal for trim accents, interior panels, displays, and cosmetic covers.

Key Features

• Matte/Satin finish: reduced glare, great match for matte clear-coated carbon parts.
• Realistic 2x2 twill pattern: carbon fiber look for cosmetic upgrades.
• Air-release adhesive: dry-apply installation with easier bubble relief.
• Conformable film (~5 mil/0.005″): stretches with heat to wrap gentle curves and contours.
• Works with standard tools: squeegee, heat gun, and a sharp knife are typically all you need.

Typical Uses

• Interior/exterior trim accents, fairings, dashboards, consoles, bezels, and displays.
• Cosmetic covers, panels, and skin overlays where a carbon look is desired.
• Show builds, retail fixtures, signage, and prototype mock-ups.

Specifications

• Pattern: Carbon fiber 2x2 twill (print/emboss graphic)
• Finish: Matte/Satin
• Thickness: ~0.005″ (≈5 mil)
• Adhesive: Pressure-sensitive with air-release channels (dry-apply)
• Width: 60″ (152.4 cm)
• Color: Carbon black/graphite look
• Note: Cosmetic wrap only—not structural and does not replace composite materials.

Installation Tips

• Apply to clean, degreased, smooth, non-porous surfaces. Avoid silicone dressings and wax residues.
• Install dry using a felt-edge squeegee; use a heat gun for gentle curves and to set edges.
• Post-heat wrapped edges to help adhesive flow and improve edge hold. Avoid overstretching patterns.
• Not intended for high-temperature zones, continuous fuel/solvent exposure, or textured/porous substrates.

Ordering

• Standard Width: 60″ (152.4 cm)
• Sold by:Linear yard — 1 yard = 36″ × full width
• Continuous Lengths: Multiple yards ship as one continuous roll whenever possible.

Color/Pattern Notice: Due to monitor settings, lighting, and production variation, the actual shade/pattern scale may differ slightly from photos.