Carbon Fiber 2x2 Twill Gloss Finish Vinyl Sticker 60"/152.4cm Wide Air Release

Carbon Fiber 2x2 Twill Gloss Finish Vinyl Sticker — 60″ (152.4 cm) Wide • Air-Release

Give parts the premium look of carbon fiber without the layup. This gloss-finish 2×2 twill vinyl sticker features an embossed weave pattern and air-release microchannels that make dry installation fast and smooth with minimal bubbling. The film can be gently heated to stretch and conform over mild curves, edges, and recesses—perfect for color-matching to real carbon panels or creating a clean, high-contrast accent on finished parts.

Key Features

• Authentic look: 2×2 twill carbon pattern with a high-gloss topcoat for a “clear-coat” appearance.
• Air-release adhesive: Built-in channels allow bubbles to escape during dry application.
• Conformable: Can be warmed with a heat gun to wrap around mild curves, edges, and contours.
• Protective liner: Peel off the protective film just before install to reveal a clean gloss surface.
• Non-structural cosmetic wrap: Ideal for matching cosmetic carbon parts or refreshing surfaces.
• Thickness: Approximately 0.005″ film for a sleek, lightweight look.

Typical Applications

• Interior/exterior cosmetic accents, trim pieces, electronics, panels and enclosures.
• Dash, console, door inserts, spoilers, splitters, mirror caps, and small body accents.
• Signage, display builds, prototype styling, and show-car detailing.
• Matching or complementing real carbon-fiber components.

Specifications

• Pattern: 2×2 twill carbon-fiber look (embossed texture under a gloss face film)
• Finish: High-gloss
• Adhesive: Pressure-sensitive with air-release microchannels (dry-apply)
• Nominal Thickness: ~0.005″
• Substrate: Flexible vinyl film (non-structural, cosmetic)
• Width: 60″ (152.4 cm)

Installation Tips

• Clean and degrease the surface thoroughly; the substrate must be smooth, dry, and dust-free.
• Dry-apply with firm squeegee strokes, working from the center outward to evacuate air.
• Use controlled heat to soften the film as needed for mild curves and edges—avoid overheating.
• Post-heat wrapped edges to help set the film. Avoid stretching across sharp or complex features.
• Allow adhesive to fully set before regular service/handling.

Ordering

• Standard Width: 60″ (152.4 cm)
• Sold by:Linear yard — 1 yard = 36″ × full width
• Continuous Lengths: Multiple yards ship as one continuous roll whenever possible.

Color/Finish Notice: Due to monitor settings, lighting, and production variation, the perceived color/texture and gloss level may differ from photos. This cosmetic wrap does not add structural strength.