Airtech Release Ease 236 Teflon NON Porous Peel Ply
Description
Airtech Release Ease® 236 TFNP – Teflon (PTFE) NON-Porous Peel Ply – 38" Width
Release Ease® 236 TFNP is a non-porous PTFE-coated fiberglass release fabric engineered to minimize fabric mark-off and produce a smooth, high-gloss surface on molds and parts. Because it is non-porous, it does not allow resin or volatiles to pass through—making it ideal where you want to retain resin content (not for infusion). It offers robust handling, can be used with all common resin systems, and is well suited for flat and simple-contour tools.
Key Features
- Non-porous PTFE release surface: Excellent release; reduces fabric print and hand finishing.
- High service temperature: Continuous service to 550°F (288°C) (process/part dependent—test for your cycle).
- Durable fiberglass backing: Tough, stable sheet; can help reduce consumable usage and cutting time.
- Resin systems: Compatible with epoxy, vinyl ester, polyester, and more.
- Use case: Release sheet for molding flat and simple shapes; retains resin (no bleed).
Notes
- Maximum use temperature depends on time at temperature and specific process—qualification testing recommended.
- Color may vary slightly between lots. Hot-knife (sealed edge) slitting available upon request (roll minimums apply).
Ordering
- Width: 38" (965 mm)
- Sold by: Linear yard — Multiple yards ship as one continuous piece whenever possible
- Full Roll Length: 100 Yards