Airtech Bleeder Lease B Coated Peel Ply
Description
Airtech Bleeder Lease® B – Coated Peel Ply, 60" / 152.4 cm Width
Bleeder Lease® B is a tightly woven, nylon peel ply coated with a silicone release agent to prevent adhesion to the laminate while leaving a consistent, slightly textured surface for secondary bonding, fairing, or paint. It is widely used for vacuum infusion, wet layup, and prepreg processes and works with most common resin systems.
Key Features
- Coated nylon peel ply: Silicone release finish provides reliable, easy peel after cure.
- Bond-ready surface: Produces a uniform tooth ideal for adhesives and coatings.
- High-temperature capable: Suitable for typical composite cure schedules (process dependent).
- Process friendly: Common choice for infusion and wet layup stacks.
- Identification: Distinctive green coloration for easy shop recognition.
Use & Placement
- Lay peel ply directly against the laminate (over the final reinforcement or over perforated release as specified).
- After cure, peel at a low angle to reveal a clean, bondable profile—minimal sanding required.
- Not intended for cosmetic high-gloss finishes (peel ply leaves texture by design).
Ordering
- Width: 60" (152.4 cm)
- Sold by: Linear yard — Multiple yards ship as one continuous piece whenever possible
- Full Roll Length: 100 Yards