Orange Tooling Polyester Gelcoat

Isophthalic Tooling Gel Coats are designed to provide the hard, durable, high-gloss surface required in a superior grade polyester tool. The toughness and chemical resistance of these tooling gel coats will develop within 24 – 48 hours after lamination and removal from the master or plug.

APPLICATION

It is recommended that only 3-5 mils be applied with the initial passes of the spray gun. The “several passes” technique will keep air entrapment at a minimum and result in a “pin hole and porosity free” film. A film thickness of 20-25 mils should be applied in order to obtain maximum mold life. It is essential that the mold temperature and ambient air temperature, as well as the material temperature, be within a temperature range of 65°F/18.3°C to 80°F/26.6°C for best results.

The item has a shelf life of approximately 2-3 months.

5 Gallon purchases will be charged by the shipping company an additional $50 Hazmat fee.

This item is flammable and can only be shipped by ground.