PRO-SET INF-114 Infusion Resin
Description
PRO-SET® INF-114 Infusion Resin – Low-Viscosity Epoxy for Vacuum Infusion & VARTM
PRO-SET® INF-114 Infusion Resin is a super low-viscosity epoxy system designed for modern resin infusion and VARTM processes. This formulation ensures quick wet-out of reinforcing fabrics, minimal void content, and exceptional laminate clarity. Paired with the full range of PRO-SET INF Hardeners (INF-210, INF-211, INF-212, INF-213), the system provides adjustable gel times and excellent mechanical performance for marine, automotive, wind energy, and composite manufacturing applications.
Choose Your Working Time
- INF-210 – Extra Slow: Longest open time; ideal for very large parts and warm ambient conditions.
- INF-211 – Slow: Balanced flow and pot life for large laminates and moderate shop temperatures.
- INF-212 – Medium: Good all-purpose option for most infusion projects; medium gel time and cure speed.
- INF-213 – Fast: Short working time; best for smaller parts, cool conditions, or quick turnarounds.
Available Package Sizes
- 0.99 Gallon
- 4.2 Gallon
- 14.2 Gallon
Why Choose PRO-SET Infusion Systems
- Ultra-low viscosity for superior fabric wet-out and thorough flow through complex laminates.
- Excellent strength-to-weight ratio with minimal print-through on finished surfaces.
- Designed for clean, bubble-free laminates with consistent physical properties.
- Resin and hardeners can be blended to fine-tune gel time for your temperature and project size.
- Room-temperature cure with optional post-cure for elevated temperature performance.
Mixing & Use
Mix only with PRO-SET INF Hardeners (INF-210 through INF-213). Follow all mixing and processing instructions on the hardener label and the Technical Data Sheet. Always measure accurately, mix thoroughly, and observe proper safety and ventilation practices.
Applications
- Vacuum infusion and VARTM of hulls, decks, bulkheads, and composite panels.
- Automotive and motorsports body panels, interior parts, and aerodynamic structures.
- Wind energy components, architectural panels, and high-performance industrial laminates.
Note: Cure time and handling properties depend on hardener selection, ambient temperature, and part size. Refer to the PRO-SET INF Technical Data Sheet for detailed information on mix ratios, gel times, and post-cure schedules.